AEMC AC/DC Current Probe Model MR6292

Alat Laboratorium Mikrobiologi

Deskripsi produk
AC/DC Current Probe Model MR6292
The AC/DC Current Probe Model MR6292 is an accessory for the AEMC® Micro-Ohmmeter Model 6292. The Model MR6292 probe is required for using the Model 6292 to take measurements in BSG (both sides grounded) mode. The probe is designed to meet the latest safety and performance standards. The probe’s hook-shaped jaws enable you to “pry” into or “hook” onto cables (it will accept 2 x 500 MCM) or small bus bars.The Model MR6292 uses Hall effect technology. All electronics are self-contained in the handle. The output of the probe is 10mV/A. No battery is required; the probe operates via voltage provided by the Model 6292. The probe has a proportional mV output for direct reading on the Model 6292.

Specifications:

Meter Compatibility
AEMC 6292
Maximum Clamping Diameter
One 1.18” (30mm) or two 0.95” (24mm) or two bus bars 1.2 x 0.4” (31.5 x 10mm)
Current Range
50ADC
Measurement Range
1 to 50ADC
Accuracy
1.5%R ± 0.2A
Output
5 ft (1.5m) lead with 4-conductor shielded cable with 5-pin XLR connector
Power Source
Powered by AEMC 6292
Operating Temperature
14° to +131°F (-10° to +55°C); 90% RH
Storage Temperature
-40° to +176°F (-40° to +80°C)
Dimensions (HxWxD)
8.8 x 3.82 x 173” (224 x 97 x 44mm)
Weight
15 oz (440g)
Pollution Degree
2
Ingress Protection
IP 30
EMC
EN50081-1 Class B, EN50082-2 Electrostatic discharge, IEC 1000-4-2
Safety Compliance
EN 61010-2-32, 600V CAT III

Hubungi :

Juni Tarigan (Mr.)

0811 198 0702


Pera (Ms.)

0811 3801 0819


Admin

0813-2310-201


PT. ANDALAN BANGUN SEJAHTERA

Jl. Sumur Batu No. 1, Kemayoran

Jakarta Pusat - Indonesia 10640

Telp : +6221-42803207, 4227517


Fax : +6221-42803208