CANNON Certified Viscosity Check Oils N/A

Alat Laboratorium Mikrobiologi

Spesifikasi dan Katalog
ASTM D445, ASTM D5293, ASTM D4684
CANNON certified viscosity check oils verify SAE target viscosities for kinematic viscometers, cold-cranking simulators and mini-rotary viscometers per ASTM D445, D5293 and D4684 respectively. Each check oil contains a commercial engine oil with certified values at common blend target values for density in g/cm³ (g/mL) at 15 °C, kinematic viscosity in mm²/s (cSt) at 40 °C and 100 °C as well as cranking and pumping viscosities in mPa•s (cP) at SAE J300 specification temperatures. CANNON certified viscosity check oils are available in 1 L (quart) and 3.8 L (gallon) sizes.

Check Oil Viscosity Tables
Nominal viscosity values for CANNON viscosity check oils (CVCO)
This table presents nominal data. Actual values, provided with each standard, may vary slightly from lot to lot and formulations are subject to change. If your application requires close conformity with published nominal values, please contact technical service to obtain the actual viscosity values associated with the current formulation.

VISCOSITY STANDARD & CATALOG NUMBER
ASTM TEST METHOD
TEMP. (°C)
TYPICAL VISCOSITY
CVCO-5W30

9727-S00.032 (1 L)
9727-S00.0128 (3.8 L)
D445
40
58 cSt
D445
100
11 cSt
D5293
−25
3000 mPa·s
D5293
−30
5800 mPa·s
D4684
−35
20000 mPa·s
D4052
15
0.85 g/mL

CVCO-10W30

9727-S01.032 (1 L)
9727-S01.0128 (3.8 L)
D445
40
70 cSt
D445
100
11 cSt
D5293
−20
2800 mPa·s
D5293
−25
5700 mPa·s
D4684
−30
21000 mPa·s
D4052
15
0.88 g/mL

CVCO-15W40

9727-S02.032 (1 L)
9727-S02.0128 (3.8 L)
D445
40
100 cSt
D445
100
14 cSt
D5293
−15
3500 mPa·s
D5293
−20
6500 mPa·s
D4684
−25
25000 mPa·s
D4052
15
0.88 g/mL
Alat Laboratorium Umum


Hubungi :

Juni Tarigan (Mr.)

0811 198 0702


Pera (Ms.)

0811 3801 0819


Admin

0813-2310-201


PT. ANDALAN BANGUN SEJAHTERA

Jl. Sumur Batu No. 1, Kemayoran

Jakarta Pusat - Indonesia 10640

Telp : +6221-42803207, 4227517


Fax : +6221-42803208