The DRX Aerosol Monitor can measure both mass and size fraction at the same time and provides a gravimetric sample. It is suitable for indoor and outdoor applications, industrial and occupational hygiene, baseline screening, remote monitoring and research studies.
Leading the industry in real-time dust monitoring, the DustTrak™ DRX Aerosol Monitor 8533 can simultaneously measure both mass and size fraction. The DustTrak DRX desktop monitor is a multi-channel, battery-operated, data-logging, light-scattering laser photometer that gives you real-time aerosol mass readings and collects a gravimetric sample. It uses a sheath air system that isolates the aerosol in the optics chamber to keep the optics clean for improved reliability and low maintenance.
It is suitable for clean office settings as well as harsh industrial workplaces, construction and environmental sites, and other outdoor applications. The DustTrak DRX monitor measures aerosol contaminants such as dust, smoke, fumes and mists.
FEATURES & BENEFITS
- Simultaneously measure size-segregated mass fraction concentrations corresponding to PM1, PM2.5, respirable, PM10 and PM Total size fractions
- STEL alarm setpoint
- Touchscreen interface
- TrakPro data analysis software
- Automatic zeroing (with optional zero module) minimizes the effect of zero drift
- Perform in-line gravimetric sampling for custom reference calibrations
- Manual and programmable data logging functions
- Aerosol concentration range 0.001 to 150 mg/m3
- Environmental protected and tamper-proof with Environmental Enclosure
- Desktop unit with battery and AC adapter
Specifications
Models 8533
DUSTTRAK™ DRX Aerosol Monitor
Sensor Type : 90° light scattering
Particle Size Range : 0.1 to ≅15 μm
Aerosol Concentration Range :
8533 Desktop 0.001 to 150 mg/m3
Display :
Size Segregated Mass Fractions for PM1, PM2.5, Respirable, PM10 and Total.
All displayed
Resolution :
±0.1% of reading or 0.001 mg/m3, whichever is greater
Zero Stability :
±0.002 mg/m3 per 24 hours at 10 sec time constant
Flow Rate :
3.0 L/min
Flow Accuracy :
±5% of factory set point, internal flow controlled
Temperature Coefficient :
+0.001 mg/m3 per °C
Operational Temp :
32 to 120°F (0 to 50°C)
Storage Temp :
-4 to 140°F (-20 to 60°C)
Operational Humidity :
0 to 95% RH, non-condensing
Time Constant
User adjustable, 1 to 60 seconds
Data Logging :
5 MB of on-board memory (>60,000 data points)
45 days at 1 minute logging interval
Log Interval :
User adjustable, 1 second to 1 hour
Physical Size (HWD) :
Desktop 5.3 x 8.5 x 8.8 in.
(13.5 x 21.6 x 22.4 cm)
Weight :
Desktop 3.5 lb (1.6 kg), 4.5 lb (2.0 kg)–1 battery,
5.5 lb (2.5 kg)–2 batteries
Communications :
8533 USB (Host and Device) and Ethernet. Stored data
accessible using flash memory drive
Power–AC :
Switching AC power adapter with universal line cord included, 115–240 VAC
Analog Out :
8533 User selectable output, 0 to 5 V or 2 to 20 mA
User selectable scaling range
Alarm Out
8533 Relay or audible buzzer
Relay
Non-latching MOSFET switch
User selectable set point
–5% deadband
Connector 4-pin, Mini-DIN connectors
Screen
8533 5.7 in. VGA color touchscreen
Gravimetric Sampling:
8533 Removable 37 mm cartridge (user supplied)
CE Rating
Immunity EN61236-1:2006
Emissions EN61236-1:2006
Gas Analyzer
