fluidscan® q1000/eliminating uncertainty in oil condition.

FluidScan® Q1000/Eliminating Uncertainty In Oil Condition.

Update Terakhir

01 / 12 / 2019

Min. Pembelian

1 Buah

Harga

CALL

Contact :
Marketing : Bpk Juni / 08111980702
Marketing : Ibu Pera / 085210207070
Telp : 021 - 42803207
Fax : 021 - 42803208
email : [email protected]

Suplier alat-alat laboratorium & Intrument untuk berbagai keperluan alat-alat laboratorium Microbiology, Chemical and Reagent, Equipment, Medical dan Glassware.

Deskripsi Produk Deskripsi

Detail FluidScan® Q1000/Eliminating Uncertainty In Oil Condition.

Eliminating uncertainty in oil condition.

The FluidScan® Q1000 provides direct quantitative measurement of a lubricant’s condition and plays an important role in Machine Condition Monitoring (MCM) for proactive and predictive maintenance in Reliability Management programs. It determines when oil needs to be serviced due to degradation of the oil chemistry or contamination by other fluids such as water or the wrong oil. It is compliant with ASTM D7889 “Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy”.

It also fulfils the National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion Engines (NESHAP RICE) requirements for extending oil change intervals in engines and back-up generators when used in conjunction with the Spectro Q3050 Portable Viscosmeter.

This portable IR spectrometer uses advanced data processing and a built-in oil application library to deliver immediate, actionable quantitative results for water, TAN and TBN.

Applications include mineral and synthetic oils used in machinery components:

Gear boxes
Compressors
Hydraulic systems
Turbines
Transmissions
Diesel engines

Features & Benefits

Analytical Test

Oil Property	Properties measured by FluidScan
Transmission	Water (PPM), Oxidation (Abs/0.1mm)
Hydraulic - Fire resistant (Phosphate Ester)	Water (PPM), TAN (mg KOH/g)
Hydraulic - Aerospace (Synthetic Hydraulic Fluid)	Water (PPM), Oxidation (Abs/0.1 mm), Alien Fluid mineral based (MIL-H-2304) (%), and Alien Fluid engine oil (ML-H-23699) (%)
Heat Transfer (Quenching Oil)	Water (PPM), Oxidation (Abs/0.1 mm)
Industrial (Steam and CCGT Turbine, Hydraulic, compressor, Chiller, Gear, etc.)	Water (PPM), Oxidation (Abs/0.1 mm), TAN (mg KOH/g)
Turbine Aerospace (Synthetic Gas Turbine Oil)	Water (PPM), TAN (mg KOH/g), Antioxidant (% depletion)
Engines (Engine oil for different engine types, including Gasoline, Diesel, Heavy Duty Diesel, HFO, Natural Gas, ctc)	Water (PPM), Oxidation (Abs/0.1 mm), TBN (mg KOH/g), Sulfation (Abs/0.1 mm), Nitration (Abs/cm), Soot (%), Glycol (%), Anti Wear (%)
Ethanol in Gasoline	Ethanol (%)
FAME in Diesel	FAME (%)
Biodiesel Feedstock	Water (PPM), FFA %
Biodiesel	Water (PPM), TAN (mg KOH/g), Total Glycerin (%)

Highlights

ASTM Compliance

ASTM D7889 Compliant - “Standard Test Method for Field Determination of In-service Fluid Properties Using IR Spectroscopy”
High correlation to KF water, TAN and TBN laboratory tests
Reproducibility and repeatability comparable to benchtop FTIR method ASTM E2412
Data analysis compliant to ASTM E1655
High correlation to KF water, TAN and TBN laboratory tests
Reproducibility and repeatability comparable to benchtop FTIR method ASTM E2412
Data analysis compliant to ASTM E1655

Easy to use

Needs just one drop of oil and one minute to test
No solvents required to clean
Color coded alarm levels

Comprehensive Fluid Library

The Q1100 is available with over 500 fluids in the on-board Oil Library for immediate, out-of the-box operation, and additional oils can be added to the oil library by the end-user.
Results for critical properties such as TAN, Oxidation and water contamination for industrial lubricants and TBN, water, oxidation,nitration,sulfation, glycol and soot for engine oils.

Fluid Manager desktop application provides: