Back to Top

Hi, Guest!
  • Hydrobios Sediment Trap Acc To Saarso

Hydrobios Sediment Trap Acc To Saarso

Update Terakhir
01 / 12 / 2019
Min. Pembelian
1 Unit


Contact :
Marketing : Bpk Juni / 08111980702
Marketing : Ibu Pera / 085210207070
Telp : 021 - 42803207
Fax : 021 - 42803208
email :

Suplier alat-alat laboratorium & Intrument untuk berbagai keperluan alat-alat laboratorium Microbiology, Chemical and Reagent, Equipment, Medical dan Glassware.

Detail Hydrobios Sediment Trap Acc To Saarso

Sediment Traps are containers that allow to quantify sinking particulate matters in aquatic environments. Our tubular design provides a relatively small sampling area but allows suspended matters to settle without the risk of being flushed out even under turbulent environmental conditions (as it happens with large-area conical traps). The Sediment Trap has been designed for autonomous operation in aquatic environments with relatively high vertical particulate flux value. The instrument does not need heavy moorings. Two wide clamps simplify its use in vertical series attached to the same mooring line. Each trap is equipped with a dismountable baffle grid at the opening to reduce turbulences, avoiding wash out of the sediment from the upper part of the cylinder. The water above the collecting bottle can be drained via two cocks. The transparent funnel bottom enables to check for re-suspension of sediment from the collecting bottle after recovery.

TECHNICAL DATA Opening area 0.015 m² Cylinder diameter 140 mm Cylinder length 560 mm Total length 900 mm Diameter to length ratio 1 : 4 Cone angle 40 Grid dimensions 20 x 20 x 40 mm Mooring line diameter 6 mm Material PVC, PE Weight in air/ water 3 kg /1 kg
ORDERING INFORMATION Products 444 000 Sediment Trap (Single bottle version) Spare Parts 444 150 Spare Collecting Bottles 250 ml
with screw cap (1 set of 24 pcs.)
Tampilkan Lebih Banyak
Kontak Kami