1
Hi, Guest!

Koehler K25330 Copper Strip Corrosion Test Tube Bath

Update Terakhir
:
30 / 10 / 2019
Min. Pembelian
:
1 Unit
Contact :
Marketing : Bpk Juni / 085210207070
Marketing : Ibu Pera / 085212122008
Telp : 021 - 42803207
Fax : 021 - 42803208
email : sales@andalanbangun.com

Suplier alat-alat laboratorium & Intrument untuk berbagai keperluan alat-alat laboratorium Microbiology, Chemical and Reagent, Equipment, Medical dan Glassware.

Detail Koehler K25330 Copper Strip Corrosion Test Tube Bath

Test Method
The Copper Strip Tarnish Test assesses the relative degree of corrosivity of petroleum products, including aviation fuels, automotive gasoline, natural gasoline, solvents, kerosene, diesel fuel, distillate fuel oil, lubricating oil and other products. A polished copper strip is immersed in 30mL of sample at elevated temperature. After the test period, the strip is examined for evidence of corrosion and a classification number from 1-4 is assigned based on a comparison with the ASTM Copper Strip Corrosion Standards. For aviation fuels and natural gasoline the sample tube is placed inside a stainless steel bomb during testing.

Features and Benefits
• Conforms to ASTM D130 and related test specifications


Click on the image to view a larger photo of the instrument.
 

K25330 Copper Strip Corrosion Test Tube Bath
Constant temperature bath immerses 16 test tubes for copper strip tarnish tests of products not requiring a test bomb, including: diesel fuel, fuel oil, automotive gasoline, Stoddard solvent, kerosene and lubricating oil. Microprocessor temperature controller has °C/°F switchable digital setpoint and display. Operator and equipment are protected by an overtemperature control circuit which automatically interrupts power to the unit should bath temperature exceed a programmed cut-off point. Communications software (RS232, etc.), ramp-to-set and other enhanced features are available as extra cost options. Contact your Koehler representative for information. Welded stainless steel double-wall construction with built-in support rack. Fully insulated.

Specifications
Conforms to the specifications of:
ASTM D130, D6074, D6158; FSPT DT-28-65; IP 154; ISO 2160; DIN 51759; FTM 791-5325; NF M 07-015

Capacity: 16 test tubes

Maximum Temperature: 190°C (374°F)

Temperature Control Stability: ±1°C (±2°F)

Heater Range: 0-750W

Bath Medium: 5 gal (18.9L) water or high temperature heater transfer fluid

Temperature Control: Digital

Electrical Requirements
115V 50/60Hz, Single Phase, 7.5A
220-240V 50/60Hz, Single Phase, 4A

Dimensions Ixwxh,in.(cm)
15.5x12.5x14 (39x32x36)
Net Weight: 27 Ibs (12.2kg)

Shipping Information
Shipping Weight: 45 Ibs (20.4kg)
Dimensions: 12.8 Cu. ft.

Tampilkan Lebih Banyak
pt andalan bangun sejahtera
pt andalan bangun sejahtera

PT ANDALAN BANGUN SEJAHTERA

Anggota PREMIUM 9 Tahun
JL. Sumur Batu No.1 RT.01 - RW.06 Kel.Sumur Batu - Kec.. Kemayoran, Jakarta Pusat
Indonesia 10640
Jakarta Pusat
21 / 11 / 2019
Hubungi Kami

Detail Koehler K25330 Copper Strip Corrosion Test Tube Bath

Test Method
The Copper Strip Tarnish Test assesses the relative degree of corrosivity of petroleum products, including aviation fuels, automotive gasoline, natural gasoline, solvents, kerosene, diesel fuel, distillate fuel oil, lubricating oil and other products. A polished copper strip is immersed in 30mL of sample at elevated temperature. After the test period, the strip is examined for evidence of corrosion and a classification number from 1-4 is assigned based on a comparison with the ASTM Copper Strip Corrosion Standards. For aviation fuels and natural gasoline the sample tube is placed inside a stainless steel bomb during testing.

Features and Benefits
• Conforms to ASTM D130 and related test specifications


Click on the image to view a larger photo of the instrument.
 

K25330 Copper Strip Corrosion Test Tube Bath
Constant temperature bath immerses 16 test tubes for copper strip tarnish tests of products not requiring a test bomb, including: diesel fuel, fuel oil, automotive gasoline, Stoddard solvent, kerosene and lubricating oil. Microprocessor temperature controller has °C/°F switchable digital setpoint and display. Operator and equipment are protected by an overtemperature control circuit which automatically interrupts power to the unit should bath temperature exceed a programmed cut-off point. Communications software (RS232, etc.), ramp-to-set and other enhanced features are available as extra cost options. Contact your Koehler representative for information. Welded stainless steel double-wall construction with built-in support rack. Fully insulated.

Specifications
Conforms to the specifications of:
ASTM D130, D6074, D6158; FSPT DT-28-65; IP 154; ISO 2160; DIN 51759; FTM 791-5325; NF M 07-015

Capacity: 16 test tubes

Maximum Temperature: 190°C (374°F)

Temperature Control Stability: ±1°C (±2°F)

Heater Range: 0-750W

Bath Medium: 5 gal (18.9L) water or high temperature heater transfer fluid

Temperature Control: Digital

Electrical Requirements
115V 50/60Hz, Single Phase, 7.5A
220-240V 50/60Hz, Single Phase, 4A

Dimensions Ixwxh,in.(cm)
15.5x12.5x14 (39x32x36)
Net Weight: 27 Ibs (12.2kg)

Shipping Information
Shipping Weight: 45 Ibs (20.4kg)
Dimensions: 12.8 Cu. ft.

Tampilkan Lebih Banyak
Kontak Kami  
Masukan Data Diri Anda
Nama harus diisi !
Email harus diisi !
Format email harus someone@example.com !