Back to Top

1
Hi, Guest!

MEMMERT - TEMPERATURE TEST CHAMBER CTC/ TTC

Update Terakhir
:
06 / 12 / 2019
Min. Pembelian
:
1 Unit

Harga

CALL
Contact :
Marketing : Bpk Juni / 08111980702
Marketing : Ibu Pera / 085210207070
Telp : 021 - 42803207
Fax : 021 - 42803208
email : [email protected]

Suplier alat-alat laboratorium & Intrument untuk berbagai keperluan alat-alat laboratorium Microbiology, Chemical and Reagent, Equipment, Medical dan Glassware.

Detail MEMMERT - TEMPERATURE TEST CHAMBER CTC/ TTC

100% AtmoSAFE: The high flyer for climate testing ( or temperature testing) simulates according to standards the perfect atmosphere and reduces the time needed through rapid temperature changes: Medium speed at a temperature change in heating operation 10 K/ min, average speed for a temperature change in cooling operation from + 190° C to 0° C: 6 K/ min. CTC 256 CTC climatic test chamber: Climatic testing of composite materials, concrete, plastics or electronic components in material technology, the automotive and aerospace industries, and electronics. high-performance air fan in working chamber depending on operation status automatic adaption of fan speed resp. manual adjustment from 10 to 100% adaptive, fuzzy-supported, multifunctional, digital microprocessor PID-controller autodiagnostic system with fault indication on temperature and humidity control 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value digital 7-day-programme-timer with real time clock, precise minute setting integrated timer for tempering profiles of up to 40 ramps, each segment adjustable from 1 min. up to 999 hours digital display ( LED) of all set parameters, such as temperature, weekdays, time, humidity, fan speed and set-up values - language to be chosen in setup digital display of set values ( resolution: 0, 1° C below 99, 9° C, 0, 5° C above 100° C) and actual values ( resolution: 0, 1° C) of temperature ( LED) active control for humidifying and dehumidifying ( 10-98% rh) with digital display of relative humidity - resolution of display: 0, 5% , setting accuracy: 1% humidity supply with distilled water from 2 tanks integrated in unit on telescopic slide with automatic change over 2 x 10 l tanks as condensate collector, on telescopic slide long-term logging ( ring store) of all relevant data, GLP-conforming as data logger - 1024 kB programme stored on power failure parallel printer interface ( incl. real-time clock with date function) for printing logging files, suitable all PCL3-compatible ink-jet printers ( USB available via converter, see accessories) USB interface including MEMMERT Software " Celsius" for programming and documentation chip card control incl. one MEMoryCard XL with 32 kB ( up to 40 ramps) incl. works calibration certificate for -20 ° C and + 160 ° C incl. works calibration certificate for + 30° C at 60% rh high-performance ring heaters with optimised air circulation door heating to avoid condensate twin compressor speed adjustable condenser fan chlorine-free refrigerant R404A with audible and visual alarm in case of over-/ undertemperature and underhumidity, open door and empty water tank independently working, digitally adjustable electronic overtemperature controller TWW, protection class 3.3 additional integral over- and undertemperature protection " ASF" ( Auto-Safety-Function) automatically following the set value at a preset tolerance range mechanical temperature limiter TB protection class 1 switching the heating off at approx. 10 ° C above max. oven temperature w x h x d: 898 x 1730 x 1100 mm fully insulated stainless steel door with double locking and 4-point adjustment, heated rear zinc-plated steel on castors w x h x d: 640 x 670 x 597 mm, 256 l easy-to-clean interior, made of stainless steel, material no. 1.4301 ( ASTM 304) , hermetically welded 1 stainless steel grid 3-layer-high-tech-insulation lateral entry port, right, 80 mm diam. with silicone plug Halogen interior lighting 2 x 25 W, switchable with humidity control: from + 10 ° C up to + 95 ° C without humidity control: from -42 ° C up to + 190 ° C temperature uniformity in chamber: + / - 0.5 up to 2 K 400 V, 3 phases N, 50 Hz ca. 7.000 W TTC 256 TTC temperature test chamber: Temperature testing of composite materials, concrete, plastics or electronic components in material technology, the automotive and aerospace industries, and electronics. high-performance air fan in working chamber depending on operation status automatic adaption of fan speed resp. manual adjustment from 10 to 100% adaptive, fuzzy-supported, multifunctional, digital microprocessor PID-controller autodiagnostic system with fault indication on temperature control 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value digital 7-day-programme-timer with real time clock, precise minute setting integrated timer for tempering profiles of up to 40 ramps, each segment adjustable from 1 min. up to 999 hours digital display ( LED) of all set parameters, such as temperature, weekdays, time, fan speed and set-up values - language to be chosen in setup digital display of set values ( resolution: 0, 1° C below 99, 9° C, 0, 5° C above 100° C) and actual values ( resolution: 0, 1° C) of temperature ( LED) 2 x 10 l tanks as condensate collector, on telescopic slide long-term logging ( ring store) of all relevant data, GLP-conforming as data logger - 1024 kB programme stored on power failure parallel printer interface ( incl. real-time clock with date function) for printing logging files, suitable all PCL3-compatible ink-jet printers ( USB available via converter, see accessories) USB interface including MEMMERT Software " Celsius" for programming and documentation chip card control incl. one MEMoryCard XL with 32 kB ( up to 40 ramps) incl. works calibration certificate for -20 ° C and + 160 ° C high-performance ring heaters with optimised air circulation door heating to avoid condensate twin compressor speed adjustable condenser fan chlorine-free refrigerant R404A with audible and visual alarm in case of over-/ undertemperature and open door independently working, digitally adjustable electronic overtemperature controller TWW, protection class 3.3 additional integral over- and undertemperature protection " ASF" ( Auto-Safety-Function) automatically following the set value at a preset tolerance range mechanical temperature limiter TB protection class 1 switching the heating off at approx. 10 ° C above max. oven temperature w x h x d: 898 x 1730 x 1100 mm fully insulated stainless steel door with double locking and 4-point adjustment, heated rear zinc-plated steel on castors w x h x d: 640 x 670 x 597 mm, 256 l easy-to-clean interior, made of stainless steel, material no. 1.4301 ( ASTM 304) , hermetically welded 1 stainless steel grid 3-layer-high-tech-insulation lateral entry port, right, 80 mm diam. with silicone plug Halogen interior lighting 2 x 25 W, switchable from -42 ° C up to + 190 ° C temperature uniformity in chamber: + / - 0.5 up to 2 K 400 V, 3 phases N, 50 Hz ca. 7.000 W
Tampilkan Lebih Banyak
Kontak Kami