Back to Top

1
Hi, Guest!
  • PERCENT BIODIESEL IN DIESEL PORTABLE/InfraCal 2 ATR-B

PERCENT BIODIESEL IN DIESEL PORTABLE/InfraCal 2 ATR-B

Update Terakhir
:
01 / 12 / 2019
Min. Pembelian
:
1 Buah

Harga

CALL
Contact :
Marketing : Bpk Juni / 08111980702
Marketing : Ibu Pera / 085210207070
Telp : 021 - 42803207
Fax : 021 - 42803208
email : [email protected]

Suplier alat-alat laboratorium & Intrument untuk berbagai keperluan alat-alat laboratorium Microbiology, Chemical and Reagent, Equipment, Medical dan Glassware.

Detail PERCENT BIODIESEL IN DIESEL PORTABLE/InfraCal 2 ATR-B

PERCENT BIODIESEL IN DIESEL
PORTABLE, RUGGED INFRARED ANALYZER


The InfraCal 2 Biodiesel Blend Analyzer for measuring percent biodiesel in diesel is the ideal solution where a quick, accurate, on-site measurement is required and a single, repetitive biodiesel blend analysis is needed. The InfraCal 2 is based on proven IR technology, originally developed by Wilks, and used by regulatory agencies and fuel terminals worldwide.  The compact, easy-to-use InfraCal 2 has a measurement range of 0 – 100% biodiesel in diesel and an accuracy of +/- 0.2. These results are comparable to both ASTM D7371 and EN 14078. 

Samples are applied to a scratch-resistant zinc selenide attenuated total reflectance (ATR) sample plate and easily cleaned with a cloth or paper towel.  No solvents requiring special ventilation, expensive waste disposal or difficult to clean cells are needed. The analysis can be done by non-technical personnel with no formal training and is ideal for lab or field use. The InfraCal2 has added features such as touch screen display, data storage and transfer, a multi-language interface and password protected settings.  The internal battery pack allows for portability and up to 12 hours continuous use, providing results in under a minute at a fuel loading rack, in a laboratory or at a pump in a fueling station.

  • Measurement range: 0 - 100% biodiesel
  • Instrument repeatability: +/- 0.2
  • Compares to ASTM D7371 & EN 14078

Features & Benefits

  Benefits

  Features

Internal Data Storage 

Data storage including each measurement tagged with analyst, location and date/time information, and password protected instrument settings

Export

Directly to your PC via USB or a Flash Drive

Touch Screen Display

The touch screen display allows a simple set up for quick operation along with an easy calibration wizard.

Internal Battery

The internal battery pack allows for portability and up to 12 hours continuous use.
Multi-Language Interface

English, Spanish, French, Arabic

Password Protected Settings

Calibration and data are password protected to avoid accidental deletion

No need for Installation/Commissioning

The InfraCal 2 is a portable analyzer, weighing less than 5 lbs. with a 6 in. square foot print, requiring no installation or commissioning, little to no routine maintenance or recalibration.

Minimal Consumables

The analysis requires little to no consumables making the cost-per-test minimal.
 

 


Highlights

The InfraCal 2 Model ATR-B is shipped factory calibrated for 0 – 100% Biodiesel in Diesel percent measurement.  The calibration range includes ten points; 0, 2, 5, 10, 15, 20, 25, 30, 50, 75, 95 &100%.  The calibration is performed using biodiesel in High Cetane diesel fuel prepared by a certified laboratory.

Specifications:

Instrument Type Fixed Filter Infrared Analyzer
ModeI InfraCal 2 ATR-B Anaylitical Wavelength/Wave Number5.7 µm, 1745 cm-1
Power Requirements 18 volts DC, 3.3 amps, internal battery pack available
Power Supply Universal AC/DC
Weight 5.8 lb. (2.6 kg) with battery -7.0 lbs (3.2 kg)
Dimensions (17 cm) x 7.8" (19.8 cm) x 5.2" (13.2 cm)
Suggested Operating Range 5°C - 40°C
Typical Useful Measurement Range 0 - 100% Biodiesel in Diesel
Analysis Time Less than 30 seconds
Instrument Repeatability 0 - 20%±0.2%, 20 - 100%±1% of biodiesel (FAME) concentration
Communication Port USB, RS 232
Tampilkan Lebih Banyak
Kontak Kami