Schaller Humimeter SG1 Bulk Material And Powder Moisture Meter

Alat Laboratorium Mikrobiologi

Deskripsi produk
humimeter SG1 bulk material and powder moisture meter
Hand-held measuring device for determining the water content of various powders and granules
Sensor determines dielectric material properties
Little influence of bulk density
Perfect for use in big bags, buckets, sacks, chutes or heaps
Lifetime Support
Features
Moisture meter for bulk goods and powder with penetration sensor for determining the water content in the bulk or in the big bag. Very suitable for materials such as Al2O3-powder, foundry sand, additives and much more.

Required accessories: humimeter SG1 insertion sensorwith plug-in connection cable

Measurable bulk solids and powder:

Food
building materials
raw materials
fillers
other
flour

emulsifiers

fillers

kaolin powder

mineral powder

additives

polydextrose














sand

quartz sand

Choose

Cement

Topsoil

plaster

leveling fill

insulation fill

gypsum
ore

coal dust

foundry sands

aluminum oxide

Al2O3 powder

additives

chalk

stone powder

stone granules

casting powder

titanium oxide

Calcium
granules

pigments

plastics

recycling granules

waste plastics

plastic flakes

recyclates

regranulate

fillers

rock flour

silicates

oxides/hydroxides

silica acid

silica gel
desiccant

leavening agent

dyes

talc

aggregates

alloy surcharges

polishing granules

medicinal granules

pharmaceutical granules

grains

cork

washing powder

surfactants

octabin

Benefits
Very large measuring range of the detectable water content
Material can flow freely out of the sensor (no jamming, no plugging)
Reference calibration curve available
Eight free bulk material calibration curves pre-installed
Extremely robust and easy to clean with compressed air
Technical data
Measuring range
1 to 50% water content (depending on the material)
Resolution
0,1% water content
Operating temperature
0 to +40 °C
Memory function
Hold function, datalog for 10.000 logs ​​with measuring point report
Temperature compensation
Automatically
Dimensions
150 x 75 x 30 mm
Weight
270 g (with batteries)
Power Supply
4 x 1,5 Volt AA Alkaline batteries
Menu languages
English, German, French, Italian, Spanish, Russian, Portuguese, Czech, Polish and International

Further information
humimeter SG1 folder
User manual humimeter SG1
Handling and measurement process
The bulk material sensor is immediately ready for use thanks to the reference calibration curve or the pre-installed free bulk material calibration curves. The sensor is applied as follows:

Connect the insertion sensor to the humimeter SG1 measuring device and perform a self-adjustment.
The sensor is ready for use and can be inserted into the material.


3 ways to interpret the measurement result:
1. The entire measuring range of the bulk solids measuring device is divided into a unitless display on the measuring device via the reference characteristic curve (reference measuring method).
2. An assignment can be made via the free bulk material characteristics using an already existing moisture or water content.
A water content can also be assigned using an alternative reference method (gravimetric drying, etc.) and the appropriate characteristic curve can be selected from the 8 pre-installed characteristic curves.
3. By recording a specific characteristic curve (item 11217), a suitable characteristic curve for the desired product can be created in our laboratory after consultation.

The measurement result is displayed immediately and can be printed out on a printer or transferred to the PC via the USB interface.


Hubungi :

Juni Tarigan (Mr.)

0811 198 0702


Pera (Ms.)

0811 3801 0819


Admin

0813-2310-201


PT. ANDALAN BANGUN SEJAHTERA

Jl. Sumur Batu No. 1, Kemayoran

Jakarta Pusat - Indonesia 10640

Telp : +6221-42803207, 4227517


Fax : +6221-42803208