Digital Sling Psychrometer Accessory - ARH4
The Fieldpiece model ARH4 Digital Sling Psychrometer and Hygrometer Accessory Head measures both relative humidity and ambient air temperature. It calculates dew point and wet bulb. It’s great for calculating target superheat as well as logging %RH, temp, WB or DP over time. The head converts %RH, ambient temperature, dew point temperature, and wet bulb temperature to a voltage at a rate of 1 %RH or degree to 1mVDC and your reading is displayed on your meter. The ARH4 snaps directly onto Fieldpiece stick meters, data logger, electronic handles and adapters.
Dual-Temperature Accessory – model ATH4
The Fieldpiece Dual-Temperature Accessory, model ATH4, measures two temperatures simultaneously using the included k-type, wrap tab beaded thermocouples. The technology inside the ATH4 provides superior temperature compensation in rapidly changing environments commonly found while performing field service. Use the ATH4 to find Delta T and just about any temperature split you want to measure. Displays T1, T2 and T1-T2 on your Fieldpiece meter, handle or data logger. It is included with the HVAC Guide® System Analyzer to get target superheat and for the Target Evaporator Exit Temperature test. Fieldpiece offers a wide variety of k-type thermocouples for various HVAC specific applications. Use pipe clamp T/Cs with the ATH4 to check for blocked filters. Use wet and dry bulb thermocouples to find target superheat.
Non-contact Infrared Temperature Accessory with Laser Sight– ATIR3
The Fieldpiece Non-contact Infrared Temperature Accessory with Laser Sight, model ATIR3, collects infrared energy (IR) and converts it to a mVDC signal that is proportional to the temperature being measured. The temperature measured is the average of all the temperatures in the 8:1 cone of viewability. The closer you are to the target, the smaller the area measured. The further away, the larger the area. The digital, non-contact ATIR3 converts the Fieldpiece “Stick” series meter, DL3 data logger, and EHDL1 electronic handle to a one-piece infrared, or IR, thermometer. Use the optional Fieldpiece ADLS2 deluxe silicone test leads or the AHDL1 adapter handle with the ATIR3 for use with DMMs with industry standard jacks.
Gun Style IR Thermometer - SIG1
Among our most popular IR thermometers the SIG1 Gun-Styke Thermometer features a 10:1 field of view. A bright blue backlight and laser guide make taking fast and accurate temperature readings easier, better and faster. The SIG1 comes with a protective lens cap and body wrap. It works faster than thermistor-based temperature instruments and has a range of -22°F to 1022°F. Includes Auto-Power Off to conserve battery life.
Pen Style IR Thermometer with LED Flashlight - SIL2
The SIL2 is among our most accurate IR thermometers. With a 1:1 field of view and a protective IR lens cap, the SIL2, is as small as a pen and delivers big results. Features automatic data hold, measurements in °F or °C, and has excellent accuracy: ±1.5°F and a resolution of 0.5°F. The SIL2 has a range of -27°F to 230°F and includes Auto-Power Off (APO) to conserve battery life.
Shirt Pocket IR Thermometer - SIP2
The SIP2 is among the most compact IR thermometers in the HVAC/R industry. With a 1:1 field of view, the, compact design makes taking accurate temperature readings easier, better and faster. The SIP2 has a 1°F resolution and the IR sensor is faster than thermistor-based thermometers. Although small in size the SIP2 has a -22°F to 230°F temperature range and features Auto-Power Off (APO) to conserve battery life. Come with a neck band or pocket clip so you always have accurate temperature readings close by.
Infrared Thermometer with Laser Sight - SIR2
The SIR2 Infrared Pocket Thermometer with Laser Sight is among our most popular IR thermometers. It conveniently fits in a shirt pocket and boasts a 6:1 field of view. The laser guide helps you aim at the target with a reaction time much faster than thermistor based thermometers. Use it immediately after pulling from it from your pocket. A favorite among HVAC/R professionals with a range of -27°F to 482°F.
Pocketknife Style Thermometer - SPK1
The SPK1 Pocket Knife Style Thermometer features a sharp tip for punching through flex duct and hangs easily from a vent or thermostat. Pull out the probe rod just like you would a pocketknife. 16 detent position grooves hold the rod at virtually at any angle. The probe rod folds away simply with no cover sleeve to lose. Temperature range: -58°F to 392°F. One of our most popular instruments for HVAC/R field service.
Diagnostic Digital Sling Psychrometer – with Target Superheat and Target Evap Exit Temp – SRH2
The SRH2 Diagnostic Psychrometer performs all the normal functions of a digital psychrometer plus it calculates critical A/C system targets from psychometric measurements. It measures temperature (DB) and %relative humidity (%RH) and calculates wet bulb (WB) and dew point (DP). The SRH2 goes a step further than traditional digital psychrometers in that it also calculates target superheat and target evaporator exit temperature (delta T, drop across the coil, evaporator drop, temperature split) with built-in charts and the psychometric measurements. It’s the only digital psychrometer that takes measurements using an electronic sensor (NTC) or k-type thermocouples (T/C).
Water Resistant Thermometer – SWT2
The SWT2 Water Resistant Thermometer has a fixed probe tip with a protective cover. Features a sealed body for field service and a sharp tip for punching through flex duct. The SWT2 has a temperature range of -58°F to 392°F and has a MAX/MIN function to check temperatures without having to keep an eye in the display. A pocket clip, ergonomic shape and easy to read LCD make measuring temperatures easier, better and faster. With a -58°F to 392°F temperature range and the Auto-Power Off function to conserve battery life, the SWT2 is a smart choice for HVAC/R field service.
Dual-Temperature Meter – ST4
The Fieldpiece Dual-Temperature Meter, model ST4, measures two temperatures simultaneously using the included k-type, wrap tab beaded thermocouples. The technology inside the ST4 provides superior temperature compensation in rapidly changing environments commonly found while performing field service. Use the ST4 to find Delta T and just about any temperature split you want to measure. Displays T1, T2 and T1-T2 in big numbers on the LCD screen. Features two front face calibration pots and comes in our clear front case with magnetic hanger model ANC6. Use with our optional ATWB1 wet bulb thermocouple to help you find target superheat or with our pipe clamp T/Cs to check for blocked dryer filters.
